1. Stainless steel telescopic pole allows you to ad-
just the height of the device. The pole consists of 4
segments that can be rotated relative to each other.
Turn one of the segments clockwise, extend the pole
to the desired height, and then lock the segment by
turning it in the opposite direction.
2. Turn the hanger and connect it to the telescopic
pole.
3. Insert the xing mount for the net.
Installation guide
4. Install the clamping part in the steamer base
all the way, then put the nut on the telescopic pole,
lower it to the base and tighten the nut.
20
To Next Page
Loading...