English
26 4. ADJUSTMENT
0
Menu Function Descriptions Adjustable range
Brightness To set the brightness of the
screen
0 ~ 100 %
Temperature To set the color temperature 4,000 ~ 10,000 K
in 500 K increments (including 9,300 K).
Default setting is off (normal white)
NOTE
z The values shown in the Kelvin are available only as a reference tool.
z Setting the temperature under 4,000 K or over 10,000 K invalidates the
color temperature setting. (The color temperature’s setting turns “OFF”.)
Gamma To set the gamma value 1.8 ~ 2.6 (in 0.2 increments)
NOTE
z If setting the gamma value, the using the monitor in the digital signal
input is recommended.
Saturation To change the saturation -128 ~ 127
Setting the minimum level (-128) turns the
image to the monochrome.
NOTE
z The <Saturation> adjustment may cause undisplayable color tone.
Hue To change the flesh color, etc. -32 ~ 32
NOTE
z The <Hue> adjustment may cause undisplayable color tone.
Gain To change each color
(red, green and blue)
0 ~ 100%
By adjusting the red, green and blue color
tones for each mode, custom colors can be
defined. Display a white or gray
background image and adjust the <Gain>.
NOTE
z
The values shown in the percentage are available only as a reference tool.
z Setting the <Temperature> invalidates the <Gain> adjustment. <Gain>
setting returns to the defaul.
Reset To return the color settings of
the selected mode to the
default settings
Select the <Reset>.
To Next Page
Loading...
