Why is there continuous touch sound on my Eizo Monitor?
For continuous touch sounds or long calibration times on your Eizo monitor, check the baud rate for the touch panel on TouchWare. A baud rate of 1200 bps may cause these issues.
How to unlock the Enter Button on my Eizo FlexScan L760T-C?
To unlock the Enter Button on your Eizo LCD monitor, switch the monitor off. Then, while pressing the Auto Adjustment Button, switch the power back on.
What to do if letters and lines appear blurred on Eizo FlexScan L760T-C Monitor?
If letters and lines appear blurred on your Eizo Monitor, try switching the Smoothing mode.
What to do if the screen is too bright on Eizo Monitor?
If your Eizo monitor screen is too bright or too dark, adjust the Contrast and brightness settings. If the screen becomes dark or begins to flicker, please consult your dealer.
What to do if my Eizo Monitor has no picture?
If your Eizo Monitor displays no picture, try the following: Ensure the power cord is correctly connected. If the issue continues, turn the monitor off for a few minutes, then turn it back on. Also, check the Brightness setting. You may also need to switch the signal input by pressing the Input Signal Selection Button on the front control panel. Finally, try pressing the power switch.
Why can't I select smoothing on my Eizo Monitor?
The option is disabled on your Eizo monitor when the screen is displayed in 1280 x 1024 resolution.
How to fix blurred letters and lines on Eizo FlexScan L760T-C Monitor?
If letters and lines appear blurred on your Eizo monitor, switch the mode.
Why defective pixels appear on the screen of my Eizo FlexScan L760T-C?
The appearance of defective pixels (slightly light or dark) on your Eizo monitor screen is due to the characteristics of the panel itself, and not a defect of the LCD product.
What to do if the Auto Adjustment Button does not operate on my Eizo FlexScan L760T-C?
If the Auto Adjustment Button on your Eizo monitor isn't working, the adjustment lock might be enabled. To unlock it, turn off the LCD monitor, then press and hold the Auto Adjustment Button while switching the power back on. Also, the auto adjustment function is designed for AT-compatible PCs running Windows and may not work properly on MS-DOS. The function may also not work if the background color for the 'wall paper' or 'desktop' pattern is set to black. Finally, some signals from a graphics board may not function properly.
Why is the cursor jittery on my Eizo FlexScan L760T-C?
If you experience a jittery cursor when using your Eizo Monitor, or if drawing lines are not straight and smooth, it may be due to the influence of metal. When using multiple monitors close together, ensure there is adequate space between them.
General| Screen Size | 19 inches |
|---|---|
| Panel Type | TN |
| Resolution | 1280 x 1024 |
| Aspect Ratio | 5:4 |
| Brightness | 250 cd/m² |
| Response Time | 25 ms |
| Viewing Angle (Horizontal) | 170° |
| Viewing Angle (Vertical) | 170° |
| Connectivity | DVI-D, VGA |
| Color Support | 16.7 million colors |
To Next Page
