Why do error messages appear on my Eizo FlexScan L760T-C?
If error messages appear on your Eizo monitor, ensure that your PC is turned ON. Check that the signal cable is properly connected to the PC or graphics board. Try switching the signal input by pressing the Input Signal Selection Button on the front control panel. You can also use the graphics board’s utility software to change the frequency setting.
What to do if cursor position is not correct on Eizo FlexScan L760T-C?
If the cursor position is incorrect or jumps on your Eizo monitor, try turning the monitor off and on again. If that doesn't help, perform a calibration on the monitor. Note that changing the monitor's position or angle can cause the cursor to jump. Keep metals away from the panel surface. When using the touch screen, touch with one finger only and keep other fingers away; avoid resting your hand on the monitor or bezel. Sprays for preventing static electricity may affect touch panel sensitivity, so avoid using them for cleaning.
Why does my Eizo FlexScan L760T-C Monitor say no signal?
If your Eizo Monitor displays messages indicating that the signal is not being inputted correctly, first ensure that your PC is turned ON. Then, check that the signal cable is properly connected to the PC or graphics board. You might also need to switch the signal input using the Input Signal Selection Button on the front control panel. Lastly, use the graphics board’s utility software to adjust the frequency setting.
Why does the cursor jump on my Eizo Monitor?
If the cursor position is incorrect or the cursor jumps on your Eizo Monitor, try turning the monitor off and on. If that doesn't help, perform a calibration on the monitor. Avoid touching the screen while turning on the PC and monitor; touch it five seconds after the image appears. Changing the monitor's position or angle can also cause cursor jumps. Keep metals away from the panel surface. When touching the screen, use only one finger and keep other fingers away. Do not rest your hand on the monitor or bezel while touching the screen. Avoid using sprays for preventing static electricity on the screen, as they may affect the touch panel's sensitivity.
Why is the cursor jittery on my Eizo FlexScan L760T-C?
If you experience a jittery cursor when using your Eizo Monitor, or if drawing lines are not straight and smooth, it may be due to the influence of metal. When using multiple monitors close together, ensure there is adequate space between them.
Why do afterimages appear on my Eizo Monitor?
If afterimages appear on your Eizo Monitor, especially after displaying the same image for a long time, they can be gradually removed by changing the displayed image. Also, use the Off Timer function to avoid keeping the screen on continuously.
How to eliminate horizontal bars of distortion on Eizo FlexScan L760T-C?
To decrease horizontal bars of distortion on your Eizo Monitor, use the Phase setting.
How to fix vertical bars of distortion on Eizo FlexScan L760T-C?
To reduce vertical bars of distortion on your Eizo Monitor, use the Clock setting.
How to fix incorrect display position on Eizo FlexScan L760T-C?
To correct an incorrect display position on your Eizo Monitor, use the Position setting. If the problem continues, use the graphics board’s utility software to change the display position, if available.
What to do if my Eizo Monitor has no picture?
If your Eizo Monitor displays no picture, try the following: Ensure the power cord is correctly connected. If the issue continues, turn the monitor off for a few minutes, then turn it back on. Also, check the Brightness setting. You may also need to switch the signal input by pressing the Input Signal Selection Button on the front control panel. Finally, try pressing the power switch.
General| Screen Size | 19 inches |
|---|---|
| Panel Type | TN |
| Resolution | 1280 x 1024 |
| Aspect Ratio | 5:4 |
| Brightness | 250 cd/m² |
| Response Time | 25 ms |
| Viewing Angle (Horizontal) | 170° |
| Viewing Angle (Vertical) | 170° |
| Connectivity | DVI-D, VGA |
| Color Support | 16.7 million colors |
To Next Page
