Charge batteries
WARNING: Lots of events
If your device is capturing an excessive number of
events every day, you might need to recharge your
battery sooner. Plus, the battery is also drained each
time you use the Live View to look or speak through
your doorbell. To prevent excessive events, you can
adjust your motion settings to a lower sensitivity.
1. Remove the battery tab.
3. Fully charge batteries by connecting your device to a
USB charger using a Micro USB cable. It takes about
14 hours for batteries to fully charge.
2. Insert 18650 batteries
positive end facing down,
as shown on the device.
Rechargeable 18650 Battery
To Next Page
Loading...
Need help?
General
