8
INSTALLATION
Install the stand as described below, or if you want to mount it to a wall, please contact a
professional installer. Please ensure the monitor is not plugged into the wall socket and
furthermore we recommend to get another person to assist in the following task.
Attaching the stand
Step 1 Place a soft cushioned material on top of a flat surface to prevent damaging the
screen panel. Then place the Monitor screen flat on top, with the screen side facing down,
as illustrated below.
Step 2 Align the stand leg to the installation point, as illustrated below.
Tighten the screws (supplied) with a screwdriver to ax the stand to the panel.
Place the Cap ontop of the hole, it will click into place.
Step 3 Align the V stand to the base of the installed stand and tighten with screw.
Step 4 Now that both parts of the stand is tightned and complete, you can now stand the
monitor up to be used.
CAUTION!
Do not apply excessive force as this may damage the screw holes.
To Next Page
Loading...
Need help?
General
