ELA DD822 - Operating Instructions; Condensate Management

OPERATINGINSTRUCTIONS
7
When the tank is FULL the WATER FULL LED on the control panel
will illuminate, 10 ‘beeps’ will be heard and the dehumidifier will
stop operating.
DO NOT move the appliance while the tank is full as this may lead
to water spillage and create a potential hazard.
To remove the tank, grip the tank firmly by the handle and pull
outwards. Any spillage should be dried immediately to avoid a
potential hazard.
EmptyingtheCondensateTank
ContinuousDrainOption
1. Ensure the appliance is unplugged from the power
supply socket.
2. Remove the condensate tank.
3. Feed the flexible drain pipe through the condensate
tank apertures and attach to the water spigot.
4. Return the condensate tank back into the appliance
taking care not to dislodge or kink the flexible hose.
5. To ensure the condensate water drains away correctly;
no part of the drain hose must be above the water
spigot height.
Waterspigot
Handle