Need help?Do you have a question about the Elan EL-IO-200 and is the answer not in the manual?
Lists the FCC ID and IC registration numbers for the device.
Covers RS-232, RS-485 serial ports and IR output ports.
Details signal input ports and relay output connections.
Describes LAN/PoE connection and power input.
Explains how to reset the device's network settings.
Instructions for mounting the chassis to a wall.
Guidance for placing the controller on a shelf.
Instructions for using an optional mount in a wiring cabinet.
Provides the pin-out configuration for RS-232 RJ45 connectors.
Mentions null modem configuration in ELAN Configurator.
Details RS-485 port wiring, color codes, and naming conventions.
States compatibility with Xantech single and dual emitters.
Illustrates connections for contact closure and doorbell inputs.
Provides warnings about voltage and direct wiring.
Specifies limits for connected loads (24V AC/DC, 1A) and relay usage.
Lists port types, quantities, and connector details.
Covers software compatibility, operating conditions, and certifications.
Details warranty period, exclusions, and limitations.
Emphasizes purchase from authorized dealers for valid warranty.
To Next Page
General