9 of 13
Below are some basic guidelines for HHR Wi-Fi configuration. This information is for reference only and
is provided to try to help if you are having trouble with the radio encryption configuration on a router or
AP.
Basic Wi-Fi best practices:
• Do not use a router as an access point unless you have verified that it is running in access point
mode. This typically includes assigning a static IP to it outside the DHCP range, disabling the
DHCP server on it, and disabling the UPNP functionality.
• Install the WAP in a location open to the area where the remote will be used, it should be located
high (not on the floor) and not adjacent to any other devices that may interfere with it.
• Use only the antennas supplied with the WAP or Router. There are several aftermarket antennas
that are available but they may not be compatible with your device.
To Next Page
Loading...
