Need help?Do you have a question about the Elan Video Over IP and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| Type | Video Over IP |
| Manufacturer | Elan |
| Power Supply | 12V DC |
| Input Interfaces | HDMI |
| Output Interfaces | Ethernet |
| Supported Resolutions | Up to 4K |
| Operating Temperature | 0°C to 40°C |
Information regarding protection against electrical spikes and surges. Recommended device usage.
Overview of the UHD Video Over IP distribution platform, highlighting its capabilities.
Highlights of the advanced UHD video over 1GB network capabilities and operational modes.
Detailed description of the front and rear panel ports, indicators, and controls for the TX unit.
Detailed description of the front and rear panel ports, indicators, and controls for the RX unit.
Detailed description of the front and rear panel ports, indicators, and controls for the CTRL unit.
Explanation of network features like IGMP snooping and jumbo frames for optimal performance.
Guide to interpreting the LED indicators on the Video Over IP products for connectivity status.
Information on transmitter audio embedding and receiver audio breakout functionality.
Details on controlling the system via IR with receivers or third-party control systems.
How to use the remote control for input selection on the transmitters.
Description of IR control cables, emitters, and receivers for system integration.
How to use original source remote controls for field control via IR pass-through.
Configuration for 1-to-1 routed RS-232 communication between products.
Configuration for Telnet/IP to RS-232 conversion for third-party control.
Step-by-step guide to enable and configure Type 1 RS-232 mode via the Web GUI.
Steps to enable Guest Mode for Telnet/IP to RS-232 conversion.
How to establish and close Guest Mode connections for RS-232 control.
Guide to manually setting product IDs, EDID, and scaler outputs without a PC.
Table detailing EDID values and their corresponding video/audio settings for transmitters.
Table listing available scaler settings for receiver output resolution.
List of necessary hardware components prior to using the PC configuration software.
Procedure to force products into firmware update mode before updating.
Steps for updating firmware using the ELAN PC program.
Sections for managing transmitters and receivers, including EDID, firmware, and rebooting.
Tools for matrix control, video preview, and video wall setup.
Accessing advanced settings, saving configurations, and setting up new projects.
Initial steps for connecting your PC to the network for system setup.
Explanation of automatic IP address assignment for transmitters and receivers.
Guidance for when the PC wizard cannot find the new product.
Steps for naming transmitters and assigning IP addresses via the PC wizard.
Steps for naming receivers and assigning IP addresses via the PC wizard.
Finalizing setup and reviewing additional settings like EDID and scaler.
Overview of the transmitter summary screen and its features.
Steps to replace a transmitter unit using the PC program.
Overview of the receiver summary screen and its features.
Steps to replace a receiver unit using the PC program.
How to use the matrix control page to switch sources for each display.
How to view video signals for troubleshooting and diagnostics.
Alternative method for matrix switching using the video preview screen.
Guide to setting up video wall arrays, including bezel compensation and layout.
Configuring video lost detection timeouts and updating firmware via the Web-GUI.
How to copy EDID from a display to a transmitter using the Web-GUI.
Using the system search to locate active products on the network.
Steps to enable TFTP client and Telnet client in Windows for control module updates.
Procedure for updating firmware on the control and video ports of the CTRL module.
How to access the built-in web server for transmitters and receivers.
Overview of the menu structure and firmware update process for the TX transmitter Web-GUI.
Description of utilities like factory default, reboot, and EDID settings.
Information on network connection status and video EDID response.
Details on setting up video wall arrays via the transmitter Web-GUI.
Options for amending IP address details and casting modes.
Enabling Video Over IP, Video Wall, and adjusting bit/frame rates.
Configuring serial settings for RS-232 pass-through from the transmitter.
Overview of system info, firmware update, and utilities for the RX receiver.
Details on statistics, network, video, and video wall setup for the RX receiver.
Managing network settings, enabling video features, and copy EDID.
Using Serial Over IP for RS-232 signals with third-party devices.
Step-by-step guide to changing IP address settings in Windows.
Detailed steps for configuring TCP/IPv4 properties and DNS settings.
Configuring IP addresses for network switches and PCs for optimal system setup.
Visual representation of a 3x3 matrix configuration for HDMI Over IP systems.
Visual representation of a video wall configuration using ELAN Video Over IP.
Visual representation of a one-to-one distribution setup.
Visual representation of a one-to-many distribution setup.
Guidelines for terminating CAT cables with the correct RJ45 pin-out and wiring standards.
Technical details including video, audio, Ethernet, and physical dimensions for each product.
List of items included in the package and instructions for unit maintenance.
List of frequently used serial commands for controlling the Video Over IP system.
Table of IR commands for selecting inputs on the ELAN EL-4KPM-VIP-TX transmitters.
Table of IR commands for controlling the ELAN EL-4KPM-VIP-RX receivers.
Information regarding compliance with FCC and IC regulations for digital devices.
Instructions for the responsible disposal and recycling of the product and batteries.
To Next Page