Need help?Do you have a question about the Elari NanoPods and is the answer not in the manual?
General| Bluetooth Version | 5.0 |
|---|---|
| Battery Life (with charging case) | Up to 12 hours |
| Charging Time | 1.5 hours |
| Driver Size | 6 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Type | True Wireless Earbuds |
| Weight | 4.5 grams per earbud |
| Charging Port | Micro USB |
| Operating distance | 10 m |
| Impedance | 16 Ohm |
Instructions for pairing the left and right earphones to each other by pressing and holding the power keys.
Voice messages indicating successful connection between earphones and readiness for Bluetooth device pairing.
Steps to enable Bluetooth, search for devices, select 'Elari NanoPods-R', and complete the connection.
Information regarding audio playback during calls, noting sound is primarily in the right earphone.
Guidance on choosing the most suitable silicone tips for a comfortable fit.
Instructions on how to adjust the earphones to a comfortable angle for optimal wear.
Detailed functions of the Power/Call button for power, calls, music control, and language switching.
Procedure for charging the case using a microUSB port and standard USB 5 V power output.
Steps for charging the earphones by inserting them into the case and pressing the in-case power button.
Warning to use only original charging cables to prevent damage and warranty voiding.
Note on normal battery performance decrease over time with repeated charging and discharging.
Instruction not to make or receive calls while the earphones are charging.
Information on low battery voice messages and indicator lights, and automatic call transfer.
To Next Page
