Elatec TWN4 MultiTech 2 HF - Page 9

© 2024 – ELATEC GmbH – TWN4 MultiTech 2 family – user manual – DocRev01 – EN – 05/2024 Page 8 of 60
TWN4 MultiTech 2 LEGIC
Frequencies 125 kHz (LF) / 13.56 MHz (HF) / 2.4 GHz (BLE)
Antennas
Integrated RFID LF antenna
Diameter: 16.00 mm / 0.63 inch
Number of turns: 120
Integrated RFID HF antenna
Dimensions: 42.00 x 47.00 mm / 1.65 x 1.85 inch
Number of turns: 3
Bluetooth Low Energy
Plug-in BLE SAM card
2
Dimensions
(L x W x H)
Approx.
88.00 x 56.00 x 18.50 mm / 3.46 x 2.20 x 0.73 inch
Power
USB: 4.3 V - 5.5 V
RS-232: requires 5 V external power supply
ES1/PS2 classified power source according to
IEC 62368-1, short-circuit current < 8 A
Current
consumption
RF field on: 140 mA typically
Temperature
ranges
Operating: -25 °C up to +70 °C / -13 °F up to +158 °F
Storage: -40 °C up to +75 °C / -40 °F up to +167 °F
Relative humidity 5% to 95% non-condensing
R/W distance
LF and HF: up to 100 mm / 4 inch, depending on
environment and transponder
BLE: up to several meters/feet
MTBF 500,000 hours
Weight Approx. 120 g / 4.23 oz (with cable)
TWN4 MultiTech 2 LEGIC LF HF
Frequencies 125 kHz (LF) / 13.56 MHz (HF)
Antennas
Integrated RFID LF antenna
Diameter: 16.00 mm / 0.63 inch
Number of turns: 120
Integrated RFID HF antenna
Dimensions: 42.00 x 47.00 mm / 1.65 x 1.85 inch
Number of turns: 3
Dimensions (L x W
x H)
Approx.
88.00 x 56.00 x 18.50 mm / 3.46 x 2.20 x 0.73 inch
Power
USB: 4.3 V - 5.5 V
RS-232: requires 5 V external power supply
ES1/PS2 classified power source according to
IEC 62368-1, short-circuit current < 8 A
Current
consumption
RF field on: 140 mA typically
Temperature
ranges
Operating: -25 °C up to +70 °C / -13 °F up to +158 °F
Storage: -40 °C up to +75 °C / -40 °F up to +167 °F
Relative humidity 5% to 95% non-condensing
R/W distance
LF and HF: up to 100 mm / 4 inch, depending on
environment and transponder
MTBF 500,000 hours
Weight Approx. 120 g / 4.23 oz (with cable)
2
It is strictly prohibited to take the BLE SAM card out of the SAM slot on the reader. Removing the BLE SAM card is considered
as an unauthorized product modification and improper use of the product, which may result in the loss of product certifications.
ELATEC excludes any liability in case of unauthorized product modification or improper use of the product.