Need help?Do you have a question about the Elation Artiste Monet and is the answer not in the manual?
General| Color Temperature | 6, 500K |
|---|---|
| Pan Range | 540° |
| Tilt Range | 270° |
| Control Protocol | DMX, RDM, Art-NET, sACN |
| Power Supply | 100-240V AC, 50/60Hz |
| Type | Moving Head |
| Light Source | LED |
| Luminous Output | 45, 000 lumens |
| Operating Modes | DMX, Art-Net, sACN |
| Framing | 4-blade framing system |
| Color Mixing | CMY + CTO |
| Effects | Frost |
| Connectivity | 5-pin DMX In/Out, RJ45 etherCON, PowerCON TRUE1 In/Out |
Details of the manual's version, date, software requirements, and DMX modes.
Instructions for reading the manual and safely unpacking the fixture.
Contact information for Elation service and replacement parts.
Warning against user repairs and voiding the warranty.
Details the warranty period, exclusions, and conditions for Elation Professional products.
Procedure for returning items for warranty service, including R.A. numbers.
Essential safety instructions for operation and installation of the fixture.
Warnings about grounding, dimmer packs, heat, and dry location use.
Precautions regarding high-intensity UV light exposure and protective measures.
Instructions on handling, cooling, power cords, and ventilation.
Recommendations for cleaning the fixture's optics and exterior.
Points to check during routine inspections, including electrical and rigging components.
Diagram and list identifying the fixture's main components and connectors.
Visual representation of available color flags and the color wheel.
Displays of static, rotating, and animation gobo wheels.
Explanation of the SpectraColor system's CMY/CTO and RGB flag capabilities.
Guidance on using individual RGB colors and creating mixed colors.
Explanation of how high intensity affects perceived color saturation.
Dimensions, material requirements, and recommendations for custom gobos.
Contact details for Elation service regarding custom gobos.
Steps for preparing the fixture and removing top and bottom covers for access.
Instructions for loosening screws and unbending metal stays to access the GOBO module.
Steps for carefully unplugging 9-pin, 2-pin, and 4-pin connectors.
Procedure to slide the GOBO Wheel module out of the fixture.
Steps for gripping and removing a rotating gobo from its holder.
How to press the retaining spring to remove and replace a rotating gobo.
Procedure to access and remove a static gobo from its holder.
How to press the retaining spring to remove and replace a static gobo.
Warnings about flammable materials and using qualified electricians.
Guidelines for proper mounting, truss certification, and overhead rigging safety.
Fixture ambient temperature range and placement advice.
Instructions for attaching Omega Brackets to the fixture base.
Guidelines for mounting fixtures using clamps and safety cables.
Information on using Gigabit Ethernet switches for network control.
Warning about damage from sunlight, other fixtures, and lasers to internal components.
Instructions not to expose the fixture to light beams during various stages.
Explanation of how to access and navigate the fixture's system menu using buttons.
Instructions for activating and the automatic shut-off of the LCD menu display.
DMX addressing, slave mode, and auto program settings.
Details on time, temperature, IP address, software version, and error logs.
Status settings like DMX addressing, service password, and USB updates.
Options to reset motors, colors, gobos, zoom modules, and other components.
Manual control and calibration for pan, tilt, and other effects.
Settings for user modes, selecting, and editing programs and scenes.
Procedure to define the fixture's DMX address using an external controller.
Information about the service password required to access service menus.
Steps for updating the fixture software using a USB flash drive.
Options for locking the control panel and restoring factory default settings.
Procedures for testing individual channels and fine-tuning functions.
Details on calibration for movement compensation and necessary password.
Using the integrated DMX-recorder to transmit scenes from a controller.
Configuring the fixture as a slave unit for synchronized program playback.
Setting the fixture to run as a master or alone in automatic programs.
Selecting which programs are sent to slave units for Auto Pro parts.
Choosing programs to edit specific scenes into.
Steps to record scenes into programs, including scene number limits.
Illustrates how programs and scenes are grouped for slave units.
Details of DMX functions for Pan, Tilt, Cyan, Magenta, Yellow, CTO, and Pure RGB.
Functions for Color Wheel selection, fine control, and Rotating Gobo Wheel 1.
DMX control for Gobo Wheel 1 indexing and fine adjustment.
Functions for Fixed Gobo Wheel 2 indexing and control.
DMX control for prisms, prism indexing, and gobo macros.
DMX control for prism indexing fine, focus, zoom, and their fine adjustments.
DMX functions for strobe effects and dimmer control.
DMX control for dimmer modes and dimmer delay times.
DMX control for iris diameter, pulse effects, and frost filter functions.
DMX control for animation wheel indexing and rotation.
DMX control for CMY and Color Macro speed.
DMX control for various color macros and random CMY effects.
DMX control for individual blades (1A, 1B, 2A, 2B, 3A, 3B, 4A, 4B) open/close.
DMX control for framing index rotation, rotation fine adjustment, and speed.
DMX control for various framing macros and blackout functions.
DMX control for pan and tilt speed, and blackout functions.
DMX control for color change modes and color/gobo position.
DMX control for fan modes, motor resets, and refresh rate.
Specific DMX values for setting the LED refresh rate in Hertz.
Continued DMX values for setting the LED refresh rate in Hertz.
DMX control for dimmer curve modes and internal program selection.
Explanation of error messages displayed during startup and their causes.
List of common error codes and their meanings, such as PAN Er, TILT Er.
Details on the LED engine, life, and fixture effects like zoom, framing, and prisms.
Specifications for color mixing, gobos, DMX modes, and connections.
Physical dimensions, weight, power consumption, and approvals.
Diagrams showing the fixture's dimensions in millimeters and inches.
List of optional accessories with their order codes and descriptions.
Information on FCC compliance and instructions to correct interference.
Notice regarding energy saving and turning off products when not in use.
To Next Page
