What to do if the Elba EGS-D7402RG(BK) Stove burner does not light up?
If the burner on your Elba Stove isn't lighting, it might be due to: * A dirty or wet ignition spark device: Clean or dry it. * A bent rubber hose: Install the appliance properly without bending the rubber hose.
What to do if the Elba EGS-D7402RG(BK) Stove burner flame is uneven or extinguishes during use?
If you're experiencing an uneven flame or the flame extinguishes while using your Elba Stove, there could be a few reasons: * A gas supply shortage: Replace the gas cylinder. * The burner ring is not in a fixed position: Fix and fit the burner rings. * The slits in the burner caps are clogged: Clean the cap. * The burner caps are not mounted properly: Mount the burner caps in place.
Turn ignition knob counter clockwise to ON slowly. Press for seconds to ensure burner is lit.
Regulate flame power from Max to Min by turning the knob counter clockwise for lowest output.
Turn ignition knob clockwise to original position. Ensure main cock is turned off after use.
Ensure gas supply type matches rating plate. Use only specified gas type.
Keep away from flammable materials. Turn off burners and main cock when not in use.
General| Type | Gas Stove |
|---|---|
| Number of Burners | 4 |
| Color | Black |
| Burner Material | Cast Iron |
| Gas Type | LPG |
| Ignition Type | Automatic |
To Next Page
