Elba EPAC-A4215D - Operation Procedure and Modulation; Control Panel and Remote Functions

OPERATION PROCEDURE AND MODULATON
1. ON/OFF key
Press the key to turn ON/OFF the appliance.
2. Swing key
Press this key after turning on the appliance to swing the wind louver
automatically.
3. Speed key
Press the key to select High/Low wind speed.
4. Temperature/ time adjusting (Up/Down) key
Press the key at cooling mode to increase/reduce the setting temperature;
Press it at timing mode to adjust timer;
Press Up and Down keys simultaneously to switch Fahrenheit and Centigrade
deg
ree temperature.
5. Mode key
Press the key to choose cooling, wind, dehumidification and automatic mode.
6. Timer key
Press the key at standby mode to set ON time.
Press this key at ON mode to set OFF time.
7. Temperature / time display window
This window displays the adjusted temperature and time.
8. Remote controller receiver
This window is used to receive signal of the remote controller.
9. ºC/ºF switching key
Press the key to switch ℃ and ℉.
10. Continunous key
Press the key at cooling mode t
o enter cooling mode.
1
9
5
4
10
2
6
3
7
continuous