5
HOW TO REFILL WATER
1. Before water is added or re-filled into the water tank, turn the function selection knob to
left- “Boiling”. This step will segregate and prevent the non-boil water being transferred
to warm tank directly.
2. If there is not enough water inside the hot tank (below the min water level), the water
dispenser will not re-boil water.
TO RE-BOILING WATER
1. Before water is added or re-filled into the water tank, refer to the water level mark inside
the water tank and do not fill water exceeding the “Full” mark. After re-fill water, the
water dispenser will automatically boil the water.
2. At this stage, the boiling and power indicators will light up. This indicates that the water
dispenser is operating. It will takes up 2 to 3 minutes to boil the full tank of water.
3. After boiling, the boiling indicator will turn off, and the power and keep warm indicators
will light up.
TO DISPENSE WARM WATER
1. After the boiling process, turn the function selection knob to right- “Use” and boiled
water from hot tank will be transferred to warm tank.
Note: For first time usage, it may take a few minutes to enable warm water to be
dispensed from the warm tank.
Caution: When water level drop below the min water level mark, please refill water
immediately. Refer to water level indicators at the control panel.
CLEANING AND MAINTENANCE
1. Always allow appliance to cool down before cleaning.
2. Remember to unplug the plug from wall outlet.
3. Dispense the remaining water inside the water tank.
4. Wipe the product body with a damp cloth.
5. Due to impurities of water, the container may change color or has some spots after
several usages. Clean the water tank with soapy water by using sponge, cut 2 to 4 slices
of lemon and squeeze juice into the inner tank. Fill up water into the water tank till it
reaches the max line. Power on the water dispenser and let the lemon mixture store inside
the container for at least 2 hours. Pour out the water and clean the water tank with sponge
and rinse it thoroughly.
6. Do not use abrasive cleaners or scouring pad to clean the inner tank as well as the product
body.
To Next Page
Loading...