Elba RF331T - Special Features and Maintenance

17
Humidity Control lid (where fitted)
Important!
When cleaning the shelf above the vegetable bins,
we recommend that you do not disassemble the
Humidity Control lid from the shelf.
In the event that the plastic lid becomes separated
from the glass shelf, follow these instructions to
reassemble.
1
Turn shelf upside down
2
Align lid with front of shelf. Hold lid vertically
and fit front end into retainer on shelf.
Ensure lid fits into retainer.
3
Fasten the tabs at the back of the lid into the rear clips.
Ensure that the cover is fully secure at the front and the
back of the shelf.
Humidity control lid
Fig.7 Humidity Control System cleaning
Cyclic and compact special features and maintenance