ELCOS CIM-130-KLRV User Manual

CONTROL UNITS FOR IRRIGATION MOTOR PUMPS AND PUMP WATER PRESSURE CONTROL
ENGINES EQUIPPED WITH CONTROL UNIT FOR ELECTRONIC CONTROL OF THE INJECTION SYSTEM
Type
Stage V Motor
CIM-130-KLRV Without modem
- Generic
- KDI 2504TCR
- KDI 1903TCR
- KDI 3404TCR
CIM-136- KLRV With modem 2G/3G/4G
INSTRUCTION AND USER MANUAL
• It controls the engine’s acceleration and deceleration, keeping the pressure in the system at a constant rate.
• Possibility of switching off the protection of the pump.
• CANBus SAE J1939 connection.
• Setting of the minutes of work.
• Setting of the working pressure.
• Controls the flow of water in the pipe.
• Digital pump water pressure gauge.
• Clock for programming the starting and stopping of the motor pump.
• Delayed acceleration after starting.
• Delayed deceleration before stopping.
•
Assembly also on the machine and in the open air.
•
Frost protection function.
• Pressure boost function.
• Management of particulate filter regeneration
• Possibilità di visualizzare gli strumenti e le anomalie relativi al sistema di riduzione catalitica (SCR).
The CIM-136 type comes with GSM telephone modem, which allows:
• Starting or stopping with SMS commands.
• Displaying the status of the motor pump.
• Notifies via SMS message when the motor pump is in alarm condition.
MADE TO
PROTECT
Motor pump sets by stopping them in the event of:
- low oil pressure
- over-temperature
- belt breakage
- low coolant level
- low pump water pressure
- pump water overpressure
- overspeed
- A1
- A2
DISPLAY on the panel the functions of:
- hour-meter
- oil pressure gauge
- water or oil thermometer
- tachometer
- pump water pressure gauge
- timer
- fuel level gauge
- battery voltmeter
- pump protection exclusion
- particulate filter regeneration indicator light
- SCR system inducement level indicator light
- protections intervention
- emergency stop
}
available

ELCOS CIM-130-KLRV Specifications

General

Brand	ELCOS
Model	CIM-130-KLRV
Category	Control Systems
Language	English