Eldom Lumi C510B - Advanced Features and Care; Illumination and Temperature Hold; Cleaning and Limescale Removal

11
When the preset temperature is reached, the kettle will turn o.
Note. Taking the kettle o the base cancels the settings.
The appliance may be turned o at any time with the button (A).
ILLUMINATION
40°C: green light.
70°C: blue light.
80°C: yellow light.
90°C: purple light.
TEMPERATURE HOLD – 85-100°C
Press the button (A) and hold it for 3 seconds.
Activation of the function will be signalled with ashing indicator and illumination of the jug (7).
The kettle will hold the temperature (85-100°C) for 2 hours, and then it will automatically turn o.
Taking the kettle o the base cancels the settings.
CLEANING AND MAINTENANCE
- allow the unit to cool down completely before cleaning,
- do not immerse the kettle in water while washing up,
- the outside of the kettle may be wiped over with a damp cloth and washing-up liquid,
- water stains inside the kettle can be removed by rubbing with a cloth moisten with white vinegar;
rinse the inside with water afterwards,
- limescale should be removed in the following way:
- ll the kettle with 0.75 litre of water and bring it to boil,
- switch the kettle o and disconnect the kettle from the power supply,
- pour 0.1 litre of white vinegar into the kettle,
- allow to stand overnight,
- discard the solution and rinse the inside with water,
- ll the kettle with 1 litre of water and bring to boil,
- discard the water and rinse the inside with water,
- no timely removal of the scale from the heating element results in the heating element’s quicker
wear,
- any damage resulting from applying harsh descalling products available in the market are not
covered by the producer’s warranty,
- if the power cord is damaged, it can be replaced only by an especially constructed one (with
appropriate plugs and endings).