10•EN
When mixing (grinding) hot liquids, be careful not to overheat the tip (6).
The crusher cutter (6) is very sharp. It can be touched only when the appliance is disconnected
from the mains and stopped.
CLEANING AND MAINTENANCE
Disconnect the unit from the mains before cleaning.
No components are suitable for washing in dishwashers.
Do not immerse in water.
Do not clean the appliance with sharp, abrasive cloths or sponges as you can damage the appliance
this way.
- The crusher (6) must not be completely immersed in water. Complete immersion of the elements
in water may damage them and void the warranty.
- The crusher (6) should be detached from the body (4) for cleaning. Clean them with water and
some washing-up liquid. Only the cutter tip and the whisk tip can be immersed.
- The body (4) can be wiped with a damp cloth.
To Next Page
Loading...
