Eldom swit BL210 - Page 9

EN•9
SPEED SETTINGS
Using the controller (1), adjust the speed of the appliance. By adjusting the regulator, it is possible to
obtain ve dierent speeds. The appliance starts working after pressing and holding the switch (2).
The TURBO button (3) is used to immediately obtain the maximum rotational speed corresponding
to the position “5” of the controller (1).
The crusher works as long as the on / o switch (2 or 3) is pressed.
USE
Before rst use all components outside the body must be thoroughly washed and dried (see:
CLEANING AND MAINTENANCE).
- Put the tip (6) on the body (4) and lock it - make sure the tip is properly seated.
- Immerse the blade in the mixed (crushed) liquid completely.
- Select the appropriate speed using the controller (1) and press the button (2 or 3).
- Crush the ingredients in circular movements until the desired consistency is obtained.
- Press the lock buttons (5) and detach the tip (6) from the body (4) after the work is nished.
OPERATING INSTRUCTION
HAND BLENDER BL210
EN
TECHNICAL DATA
- wattage: 1000 W
- supply voltage: 230V ~ 50Hz
- maximum time of continuous operation: 1 min
- period of interval before re-use 1 minute
GENERAL DESCRIPTION
1. Speed controller
2. On/O switch I
3. On/O switch II - TURBO
4. Body
5. Interlock
6. Crushing tip
1
2
3
4
5
6