Eldom TL100N - General Description; Technical Details; Appliance Description

INSTRUCTION MANUAL
PORTABLE FRIDGE TL100N
5
4
TECHNICAL DETAILS
- wattage for 12V power supply:
cooling: 48W
heating: 40W
- wattage for 230V power supply:
MAX:
cooling: 58W
heating: 52W
ECO: 8W
- supply voltage: 230 V ~ 50Hz or 12V
- storage capacity: 25 l
GENERAL DESCRIPTION
1. Handle
2. The lid of control panel and power
cord storage compartment
3. Lid
4. Power cable 12 V (car)
5. Power cable 230 V
6. Power cord storage compartment
7. Control panel
A. Control lamp
B. COLD/HOT switch
C. ECO/MAX switch
APPLIANCE DESCRIPTION
The product combines double, integrated functions of cooling and heating through
application of semiconductor (Peltier’s cell) without using a compressor or cryogenics. The
qualities of the appliance especially worth mentioning are: environmental friendliness, small
dimensions, low weight, long life and low energy consumption.
The portable fridge TL100N cannot entirely replace a stationary fridge. It operates according to
a different cooling technique and in changeable outdoor conditions and, consequently, the
parameters, operation and performance of these two appliances are not comparable.
The appliance cools to 15°C below the ambient temperature.
It heats up to circa 60°C.
In order to achieve the optimal cooling effect it is recommended to put non-frozen products
inside the appliance. The cooling process lasts from 2 to 3 hours.
This appliance is not designed for heating cold products but for preserving the high
temperature of hot meals.
Provided the appliance is operated properly and in accordance with these instructions, the
temperature can be maintained for many hours.
Handle (1) prevents the lid from opening. Opening the lid (3) is possible only when the handle is
folded.
2
1
A
B
C
3
6
7
5