To Next PageTo Next PageWhat to do if the Ele SIEVE-TRONIC shaker does not start with the main switch ON?
If your Ele Laboratory Equipment shaker doesn't start when the main switch is ON, there could be a couple of reasons. First, check that the main power supply is correctly connected. Second, the fuses might be blown. If so, replace them with fuses of the correct capacity, which are located inside the control module.
Why Ele SIEVE-TRONIC Laboratory Equipment shaker does not start when pressing button (5) even when the display is on?
If the display of your Ele Laboratory Equipment shaker is on, but it doesn't start when you press button (5), it could be due to a wire connection failure inside the control module. Open the control module case and check the various wire connections.
General| Brand | Ele |
|---|---|
| Model | SIEVE-TRONIC |
| Category | Laboratory Equipment |
| Language | English |
Explains the sieve shaker's reliable electromagnetic drive, reduced noise, and remote control programming.
Outlines essential safety measures, including proper usage, handling, and avoiding misuse to prevent injury.
Defines hazard symbols (DANGER, CAUTION) and notes for understanding warnings and potential risks.
Lists technical specifications including dimensions, weight, operating conditions, and sound output.
Provides guidance on installation, emphasizing competent persons and correct electrical connections.
Details electrical safety testing of products and the obligation for organizations to ensure equipment safety.
Highlights cautions for lifting, operating, noise protection, and running the shaker empty.
Instructs on placing the shaker on a level surface and securing the vibrating base unit.
Describes the main control module and its components for operating the sieve shaker.
Details the function of each control button (selection, values, start/stop) and status indicators.
Details how to stack sieves and fit the clamp plate securely onto the sieve stack.
Provides step-by-step instructions for setting up the program and starting the sieving test.
Explains how to increase or decrease vibration power while the shaker is running.
Outlines maintenance as keeping the unit clean and free from debris.
Lists common faults like the shaker not starting and their possible causes and checks.
Provides information on the disposal of electrical equipment according to the WEEE directive.
