Need help?Do you have a question about the Electra BC3-L and is the answer not in the manual?
Step-by-step instructions for installing the receiver in a vehicle.
Detailed steps for aligning the Intermediate Frequency section.
Guidelines for RF section alignment, with factory sealed points.
General| Type | Receiver |
|---|---|
| Output | Headphone jack |
| Tuning range | AM: 530 - 1600 kHz, FM: 88 - 108 MHz |
| Output power | 3W + 3W (8Ω, 10% THD) |
| Frequency response | 50 Hz - 18 kHz ±3dB |
| Total harmonic distortion | 1% (1 kHz, 1W) |
| Input sensitivity | FM: 15μV, AM: 500μV |
| Signal to noise ratio | FM: 60dB, AM: 45dB |
| Speaker load impedance | 8 - 16Ω |
| Power Supply | DC 12V, 2A |
| Current Consumption | 1.5A |
| Operating Temperature | 0 - 40°C |
| Dimensions | 210 x 150 x 55 mm |
| Weight | 1.2 kg |
To Next Page
