12
FINAL CHECK - SADDLE
8
1. Put the bike next to a wall for support.
2. Have the rider sit on the seat to test the seat height. Their
knee should be slightly bent when their foot is at the lowest
position.
3. Adjust the height as necessary by raising or lowering the
seatpost.
4. After determining your seatpost height, use the torque wrench
to tighten the seatpost collar bolt until you feel the tool click.
Adjust the seat height.
Tools possibly needed
for this step:
FUN FACT: Most Electra bikes feature our Flat Foot Technology® frame
geometry. It provides a comfortable, upright riding position and when at a
stop, your feet can be planted on the ground without leaving the saddle.
To Next Page
Loading...
