Need help?Do you have a question about the Electra HYENA and is the answer not in the manual?
Advise to start on the low assist setting for the first few rides.
E-bikes are heavier and faster, requiring earlier braking.
Use brake levers gradually, braking with both front and rear evenly.
Ride with care as others may not expect the e-bike's speed.
Follow all road, path, and trail rules; greater speed means greater responsibility.
Instructions on how to power the e-bike system on and off using the power button.
Guide to choosing between four assist levels (0-3) using UP/DOWN buttons.
How to use the walk-assist mode for pushing the e-bike at low speed.
Explains the meaning of LED indicators for battery charge levels.
Steps for charging the integrated battery using the provided charger and outlet.
How to operate the front and rear lights using the UP (+) button.
Emphasizes gentle handling of the battery and consulting shops for damage.
Guidelines on charging, storing, and using only the provided charger.
Advice on transporting the e-bike, considering weight and regulations.
Riding without assist when the battery is empty.
Recommends consulting certified professionals for repairs.
States console upgrades are not possible, only replacement of defective units.
Explains that battery upgrades are not possible due to frame limitations.
General| Headset | 1 1/8" Steel Threaded |
|---|---|
| Rims | Alloy |
| Front Hub | Alloy |
| Rear Hub | Alloy |
| Shifter | Shimano Revo |
| Crankset | Alloy |
| Cassette | Shimano 7-Speed 14-34T |
| Chain | KMC |
| Handlebars | Alloy |
| Saddle | Electra Custom with elastomer springs |
| Seatpost | Alloy |
| Pedals | Alloy Platform |
| Wheels | Alloy |
| Drivetrain | Shimano Revo 7-Speed |
To Next Page
