Why do clothes shrink in my Electra TDC790B Dryer?
Clothes may shrink, felt or deteriorate if the selected program isn't suitable for the laundry type. Check the care labels on your laundry items and select an appropriate program.
What causes water leaking from the loading door of my Electra TDC790B Dryer?
Water leakage from the loading door might be due to lint accumulation on the inner surfaces of the loading door and the gasket. Clean these surfaces to resolve the issue.
Why does the loading door on my Electra TDC790B open on its own?
If the loading door opens on its own, it might not be closed properly. Push the loading door until you hear the closing sound.
Why does my Electra TDC790B take so long to dry?
Several factors can cause extended drying times. The lint filter surface may be clogged, so wash it with lukewarm water. The condenser might be clogged, requiring cleaning. Ensure the ventilation grills in front of the machine are open to prevent the room temperature from rising excessively. A limescale layer on the humidity sensor can also prolong drying, so clean the humidity sensor. Avoid overloading the dryer and select a higher spin speed on your washing machine to ensure laundry is sufficiently spun before drying.
What to do if laundry comes out damp from my Electra TDC790B Dryer?
If your laundry is damp after drying, the selected program might be unsuitable for the load. Check the care labels and choose an appropriate program, also consider using time programs. A clogged lint filter or condenser can also cause this issue, so wash the filter with lukewarm water and clean the condenser. Overloading the dryer or insufficient spinning of the laundry beforehand can also leave clothes damp. Avoid overloading and select a higher spin speed on your washing machine.
What to do if the Electra Dryer water tank warning symbol is on?
If the water tank warning symbol is illuminated, the water tank may be full, so empty it. Also, if the product is connected directly to the water outlet, inspect the water discharge hose for any bends.
Why won't my Electra TDC790B turn on or start?
If your dryer isn't starting, first ensure it's properly plugged into the socket. Check that the loading door is fully closed. Verify that you've set a program and that the dryer isn't in Standby (Pause) mode. Also, check if the child lock is active and, if so, deactivate it.
What to do if the Electra TDC790B program stops for no reason?
If the drying program is unexpectedly interrupted, ensure that the loading door is properly closed. If there was a power failure, press the Start/Pause key to resume the program. Also, the water tank might be full, so empty it.
How to clean Electra Dryer filter when the filter cleaning warning symbol is on?
When the filter cleaning warning symbol appears, the lint filter may be unclean, so clean the filter. The filter seat could also be clogged by lint, requiring cleaning. Additionally, a layer causing obstruction might have formed on the lint filter surface, so wash the filter with lukewarm water.
What does it mean if the condenser cleaning warning symbol is on in my Electra TDC790B Dryer?
If the condenser cleaning warning symbol is lit, it indicates that the condenser may be unclean. Clean the condenser.
To Next Page
General