33
3.2 Maintenance
Change of Oven Lamp
(If available)
At rst unplug the product from the
electric supply and make sure that
the product is cool. Remove the bulb
after removing the glass lens. Fit
the new bulb (resistant to 300°C) in
place of the bulb that you removed
(230 V, 25 Watt, Type E14). Replace
the glass lens. Your product will then be ready for use.The lamp
design is specic for use in household cooking appliances and
it is not suitable for household room illumination.
Other Controls
Periodically check the gas connection pipe. If even only a small
abnormality is detected, inform the technical service centre to
have it replaced. We recommend that gas connection parts should
be changed once a year. If any abnormality is felt while operating
the control knobs of cooker, contact to the authorized service.
To Next Page
Loading...
