AC01
Type 2 to domestic socket adapter 16A
USER MANUAL
INTRODUCTION
AC01 adapter is made for electric vehicles charging on classic domestic electric socket. Thanks to AC01 adapter, it is
now possible to charge these vehicles on public charging stations having Type 2 socket (IEC 62196). The adapter sends
a “vehicle connected” and “vehicle ready to charge” signal to the public charging station. This supplies power to the
domestic Schuko socket of the adapter.
START CHARGING:
1. Plug the adapter to the Type 2 socket from the public
charging station.
2. Turn A switch ON. Charging station receives a mes-
sage “vehicle connected” and locks the adapter (if it
has a locking system).
3. Turn B switch ON. Charging station receives a mes-
sage “vehicle ready to charge”.
4. Charging station starts providing current to the elec-
tric domestic socket from the adapter.
5. Connect vehicle cable to the electric domestic socket
of the adapter in order to charge.
END CHARGING:
1. Disconnect vehicle from adapter.
2. Turn B switch OFF. Charging station stops supply-
ing power.
3. Turn A switch OFF. Charging station releases the
adapter (if it has a locking system).
4. Unplug the adapter from the charging station.
5. Have a nice trip :)
© Electric-Star ES-AC01-USER-MANUAL-EN-v2 Page 1
electric-star.com - info@electric-star.com
BA
Remark: Some charging station do not require to follow this procedure. In such case, they start charging when the
adapter is plugged in with A and B switches already ON.
HOW TO USE ?
To Next Page
Need help?
General