5
Parts and Assembly
Open the package and account for all parts before disposing packing. Safely dispose of all plastic bags and
other packaging components. They may be potentially dangerous to children.
Before use please clean the lid and trays. Please clean with warm water mixed with a small quantity of mild
detergent. Clean the base of the unit a wet cloth or a sponge. Never immerse the base in water.
The drying trays are nested for easy storage. Please lift them and
turn them to full height before use so the hot air can freely flow
among each tray.
Load each tray individually and make sure they are not
overloaded, allowing air to move around.
If you want to dehydrate more liquid type like fruit leather we
recommend to cut parchment paper rounds or Teflon sheet (you
can reuse them) and lay them on the tray or half tray.
Most of the trays must be built onto the food dehydrator when
the food dehydrator is working even if some trays are empty.
Always put the tray with food onto the bottom of the food
dehydrator first and add empty trays above. Always have the lid
on when the dehydrator is in operation.
Notes:
Never put water in the dehydrator. Size the food to match the dehydrator trays. The size and thickness of
the food will influence the length of the drying process. Use the special optional mesh and solid trays for
liquid or semi liquid mixtures.
Do not run the appliance for more than 48 hours in one single use. After 48 hours, press the “START/STOP”
button twice. Unplug and let it cool down for at least 2 hours before operating again.
Don not run the unit with less than 3 trays even some of them are empty.
To Next Page
Loading...
Need help?
General