Need help?Do you have a question about the Electro-Craft BRU Series and is the answer not in the manual?
Critical safety warning regarding qualified personnel for installation and operation.
User must provide an external emergency stop circuit to prevent uncontrolled operation.
Details the pin assignments for the P3, P4, P5, and P6 connectors on the drive modules.
Lists and describes the signals and their specifications for various drive module interface connectors.
Step-by-step guide for initial setup and power-up of BRU-500 and BRU-200 drives, including safety precautions.
Explains how to configure BRU-Series drives for torque-sharing applications with multiple motors.
General| Speed Regulation | ±1% of base speed |
|---|---|
| Regulation | 1% |
| Output Current (Continuous) | Up to 10 A |
| Control Input | 0-10 VDC |
| Feedback | Tachometer |
| Operating Temperature | 0-40°C |
| Humidity | 95% non-condensing |
| Weight | Model Dependent |
To Next Page
