9V Power Jack – Although the NANO POG accepts 9V Batteries, EHX supplies
your NANO POG with an Electro-Harmonix 9.6DC-200 power supply. Plug the
output of the supplied AC adapter into the 9V power jack located at the top of
the NANO POG. The NANO POG draws 25mA at 9VDC with a center negative
plug. The NANO POG accepts Boss
®
and Ibanez
®
style AC Adapters.
- CHANGING THE BATTERY -
To change the battery, remove the four screws on the bottom of the NANO POG
and take off the bottom plate. The battery clip is in the bottom of the unit. Take
care not to touch the circuit board while changing the battery in order to avoid
damaging a component.
To Next Page
Loading...
