10/22/2008 BI302B
Electric
Mini-Boiler
TM
Installation & Operating
Instructions
Model EMB-W-9 9 kW 2 GPM minimum flow
Application - Low temperature, low pressure, radiant underfloor heating systems. This model
includes a factory installed WarmFlo
®
aquastat.
Comment - If this application is for traditional hydronics heating requiring temperatures greater than
14Ø and capacities larger than shown above, contact factory for other Electro-Boiler product series.
If this application requires temperatures greater than 140°, this is the wrong model. Contact the
distributor or factory for the EB-M*-** model series which is designed for temperatures up to 180°.
This series can also do outdoor reset and other features.
Accessories – Attached BL001 lists various accessory or option items which are not part of basic
Electro-Boiler. Page 1 gives information on a zone control update which stages elements based upon
zone capacity.
Note: This product meets the requirements of the ASME Boiler and Pressure
Vessel Code.
Drawings:
BX304
BH304
BS304
BS309
BD705
BH007
BL001
To Next Page
Need help?
General
