EasyManua.ls Logo

Electro-Voice DH3 User Manual

Electro-Voice DH3
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Technical Specifications:
The Electro-Voice DH3/2010A is a high-performance
compression driver optimized for use as the super-
tweeter component in professional sound reinforcement
systems. Precise engineering, along with careful
selection of materials and advanced driver architecture,
has resulted in a driver that is ideally suited for the most
demanding presentation of high quality music and
communications program.
Incorporating Electro-Voice’s exclusive Ring Mode
Decoupling (RMD
tm
) through all design phases has
produced drivers with unmatched accuracy while
minimizing any acoustic resonance, or time domain ringing
throughout the driver structure.
Exceptional high-frequency performance is realized
through a design which includes a specially formed
lightweight titanium diaphragm and low-mass voice coil, a
unique convex-drive phase plug and optimum magnetic
motor design, leading to compact but sensible size and
weight.
Electro-Voice’s commitment to precision compression
driver manufacturing and modern design techniques
assure the DH3/2010A user the highest level of audio
and engineering excellence.
General Description:
DH3/2010A
Very High Frequency
Transducer
Key Features:
Pure titanium dome provides extended high
frequency response
32mm pure aluminum voice coil
Unique convex-drive phase plug
1-3/8” screw on connection
1
Power capacity per AES standard. Continuous pink noise, 2000 - 20,000 Hz with a 6 dB crest factor, 2 hours.
2
Sound Pressure measured on axis in the far field with 1 Watt input of band-limited pink noise from 1500 - 5000 Hz
and calculated to 1 Meter equivalent by inverse square law.
:ecnadepmIlamimoNsmho8
:ecnadepmImuminiMzHk01@smho7
ecnatsiseRCDsmho0.5
:esnopseRycneuqerFzH000,02-0002
yticapaCrewoP
1
:.gorP.tnoCsttaW04,sttaW02
:revossorCdednemmoceRrehgiHrozH0002
:ycneiciffElanimoN%52
leveLerusserPdnuoS
2
:
)reteM1@ttaW1(
nroH24PH,Bd311
nroH46PH,Bd211
nroH49PH,Bd111
:retemaiDtaorhT)mm52("1
:retemaiDlioCecioV)mm23("52.1
:eriWlioCecioVeriWmunimulAeruP
:noitcurtsnoCmgarhpaiDdnaemoDmuinatiTeruPmm30.0
dnuorruS
:noitcennoClacirtcelEsrotcennoCno-tsaF"52.0
:ytiraloPevitisoPotegatloVevitisoP
evitisoPasecudorPlanimreT
erusserPcitsuocA
:ytisneDxulFalseT6.1
:)hcae(thgieWteN)gk5.1(sbl4.3
:thgieWgnippihS)gk9.1(sbl2.4
Question and Answer IconNeed help?

Do you have a question about the Electro-Voice DH3 and is the answer not in the manual?

Electro-Voice DH3 Specifications

General IconGeneral
TypeCompression Driver
Impedance8 Ohms
Diaphragm MaterialTitanium
Throat Diameter1 inch
Exit Diameter1 inch
Voice Coil Diameter1.75 inches

Summary

General Description

Technical Specifications

Dimension Drawings

Accessories

Details on optional adapters for different exit sizes, required for installation.

Related product manuals