Need help?Do you have a question about the Electro-Voice FM-1502 and is the answer not in the manual?
General| Power Handling (Continuous/Program/Peak) | 300 W / 600 W / 1200 W |
|---|---|
| Power Handling (RMS) | 300 W |
| Sensitivity (1W/1m) | 98 dB |
| Max. SPL/1m (calc) | 126 dB |
| Maximum SPL | 126 dB |
| Coverage (Nominal -6 dB) H° | 90° |
| Coverage (Nominal -6 dB) V° | 50° |
| Nominal Impedance | 8 Ω |
| Crossover Frequency | 1.8 kHz |
| Minimum Impedance | 6 Ω |
| LF Transducer | 15" woofer |
| Input Connections | 2 x NL4 Speakon |
| Enclosure Material | Plywood |
| Grille | Steel |
| Type | 2-way full-range loudspeaker system |
Power handling capacity per EIA Standard RS-426A.
Horizontal and vertical dispersion angles at specified frequencies.
Harmonic distortion at 0.1 full power input for various frequencies.
Harmonic distortion at 0.01 full power input for various frequencies.
Details the high-frequency driver and low-frequency woofer.
Describes the enclosure material and covering.
Lists the height, width, and depth of the speaker system.
Details the die cast 90° x 40° constant-directivity horn and titanium diaphragm driver.
Describes the 15-inch woofer and its features like TIR and PROTEFT.
To Next Page