Electro-Voice PSX 2000 User Manual

Details on connecting microphones via XLR and line-level sources via phone jacks.

Includes Gain, Low Cut, Voicing Filter, and EQ for signal shaping.

Controls for routing to FX, monitor mixes, and stereo image placement.

Indicators for signal presence/peak and channel faders for volume adjustment.

Balanced XLR mic inputs and stereo phone jack line inputs for various sources.

Adjusting sensitivity and shaping sound for stereo input channels.

Controls for effects, monitor sends, stereo balance, and signal monitoring.

Details on the 99 program presets for two independent stereo effect units.

Routing signals to and from internal effects and external units.

Switching effects on/off and monitoring signal levels to prevent clipping.

Output for external effects/monitors and a narrow band notch filter for feedback.

Controls for pre/post fader routing and pre-fader listening of AUX3 signal.

Provides mono output for monitoring and headphone output for listening.

Adjusts headphone volume and engages standby for muting outputs.

Handles external stereo signals, recording outputs, and tape/CD inputs.

Connect external processors, feed power amps, and use graphic EQs.

Monitors amplifier operation and controls master output levels and EQ.

Professional SPEAKON outputs for speakers and the main power switch.

Mains fuse, power indicator, and recommended equipment connection order.

Recommendations for high-quality cables and SPEAKON connections for speakers.

Guidance on positioning the mixer, amplifiers, and speakers for optimal performance.

Techniques for balancing the main mix and setting up stage monitors.

Connecting external amps for more power and external mixers for more inputs.

Using the internal amp for monitors and operating the mixer in mono.

Maximizing speaker connections and setting up active stereo 2-way systems.