Electro-Voice Sx200 User Manual

EledroT/bice*
- v?«L ■
300-Watt Two-Way
Portable Speaker System
• Lightweight (39 lb) and compact
• Very durable structural-foam enclosure
with integral handle
• Stand mountable and arrayable
• High efficiency (101.5 dB, 1 W/1 m)
• High power handling (300 watts
continuous, 1,200 watts shortterm)
• Concert-proven components—12-inch high-
performance wooler and DH2010A compres¬
sion driver with a titanium diaphragm
• Molded-in HF horn, with 65° x 65°
constant-directivity coverage, increases
intelligibility in noisy, reverberant rooms
• Four molded-in attachment points (metric
M8 x 1.25) for secure suspension
• Neutrik Speakon® high-current connectors
(Sx200-E) or V4-in. phone jacks (Sx200)
• F200 monitor feel provided
• Also available in white (Sx200W or
Sx200W-E)
SPECIFICATIONS
Versions Available:
Sx200— two-way, full-range speaker
system with Vi-inch jack
Sx200-E— two-way, full-range speaker
system with Speakon® connector*
Sx200W— two way. full-range speaker
system with 14-inch jack, white
Sx2O0W-E— two-way, full-range speaker
system with Speakon® connector, white*
Axial Frequency Response (swept sine-
wave input, 4 volts at 10 feet on axis,
anechoic environment, normalized for
1 watt/1 meter; see Figure 1):
80-25,000 Hz
Low-Frequency 3-dB-Down Point:
80 Hz
Usable Low-Frequency Limit with Xp200A
Controller (10-dB-down point):
55 Hz
Half-Space Reference Efficiency:
5.9%
Long-Term Average Power-Handling
Capacity per ANSI/EIA RS-426-A 1980
(see Power-Handling Capacity section):
300 watts
Maximum Woofer Acoustic Output:
17.7 watts
Sensitivity (SPL at 1 meter, 1 watt
input, anechoic environment, band-
limited pink-noise signal, 300-2,000 Hz):
101.5 dB
Dispersion Angle Included by 6-dB-Down
Points on Polar Responses, Indicated
One-Third-Octave Bands of Pink Noise
(see Figure 3),
2,000-20,000 Hz, Horizontal:
65° ±15°
2,000-20,000 Hz, Vertical:
65° ±15°
* Speakon* is a registered trademark of Neutnk. Inc.
Directivity Factor R t (Q), 800- to 16,000-Hz
Median (see Figure 4):
14.3 (+7.9,-9.3)
Directivity Index D,, 800- to 16,000-Hz
Median (see Figure 4):
11.1 dB (+2.4 dB. -4.1 dB)
Distortion, 0.1 Full Power Input,
Second Harmonic,
100 Hz: 1.2%
1,000 Hz: 1.4%
10,000 Hz: 10%
Third Harmonic,
100 Hz: 0.1%
1,000 Hz: 1.4%
10,000 Hz: 2.5%
Distortion, 0.01 Full Power Input,
Second Harmonic,
100 Hz: 0.2%
1,000 Hz: 1.1%
10,000 Hz: 1.0%
Third Harmonic,
100 Hz: 0.1%
1,000 Hz: 0.4%
10,000 Hz: 0.2%
Transducer Complement,
High Frequency:
DH201OA driver
Low Frequency:
12-inch woofer
Box Tuning Frequency: 65 Hz
Crossover Frequency: 1,500 Hz
Crossover Slope,
Low Pass:
18 dB per octave
High Pass:
6 dB per octave
impedance,
Nominal:
8 ohms
Minimum:
6 ohms
Input Connections:
Paralleled Neutrik Speakon* NL4MP
connectors (Sx200-E) or V4-in. phone jacks
(Sx200) (allows paralleling ol multiple
speakers)
Enclosure Materials and Colors:
Polypropylene structural foam; choice of
black or white
Supplied Accessories:
F200 monitor feet; Suspending
System200 JU Loudspeakers instruction
manual
Optional Accessories:
100BK mounting stand
Mb 100 eyebolt attachment kit
Mb200 installation kit
Mb300 horizontal array kit
OmniMount® Series 100 mounting hardware"
VPCSx protective cover
PDCSx padded protective cover
Other Products Available for
Enhancement of Sx200 Performance:
Xp200A system controller
Sb120 nonpowered bass module
Sb120a 400-watt powered bass module
Attachment Points:
Four metric inserts (M8 x 1.25) (see Figure
5 and Suspending Sx200 Enclosures
section)
Dimensions (see Figure 5),
Height:
58.6 cm (23.1 in.)
Width:
42.9 cm (16.9 in.)
Depth:
31.2 cm (12.3 in.)
Net Weight:
17.7 kg (39 lb)
Shipping Weight:
19.1 kg (421b)
** Ava able through OmniMount Systems. Inc. OmniMount*
is a registered trademark of OmniMount Systems Inc.

Electro-Voice Sx200 Specifications

General

Frequency Response (-10 dB)	55 Hz - 20 kHz
Power Handling (RMS/Continuous)	200 W
Power Handling (Peak)	800 W
Sensitivity 1W/1m	93 dB
Nominal Impedance	8 ohms
Enclosure Material	Polypropylene
Type	Full-range
Frequency Response	55 Hz - 20 kHz
Coverage (Nominal -6 dB) H	90 degrees
Coverage (Nominal -6 dB) V	60 degrees
Minimum Impedance	6.0 Ohms
LF Transducer	12-in

Summary

Speaker System Specifications

Axial Frequency Response

Specifies the swept sine-wave axial frequency response of the speaker system.

Low-Frequency 3-dB-Down Point

Indicates the lowest frequency at which the speaker's output is reduced by 3 dB.

Usable Low-Frequency Limit with Xp200A Controller

Half-Space Reference Efficiency

Long-Term Average Power-Handling Capacity

Specifies the continuous power handling capacity per ANSI/EIA RS-426-A standard.

Sensitivity

Defines the sound pressure level at 1 meter for 1 watt input.

Dispersion Angle

Describes the horizontal and vertical coverage angles of the speaker.

Directivity Factor R,(Q)

Directivity Index D,,,

Distortion Specifications

Details the second and third harmonic distortion at different power levels.

Transducer Complement

Crossover Frequency

Impedance Specifications

Product Features

High Efficiency

High Power Handling

Specifies the continuous and short-term power handling capabilities.

Concert-Proven Components

Molded-in HF Horn

Input Connections

Dimensions

Net Weight

Description of Speaker System

Constant-Directivity Horn

Explains the 65° x 65° constant-directivity horn for intelligibility and coverage.

System Controller and Bass Modules

High-Frequency Driver

Details the DH2010A driver with Time Path phasing plug and resonant drive technology.

High-Frequency Protection Circuit

Explains the EV PROT™ circuit for protecting the high-frequency driver.

Bass Section Design

Frequency Response Characteristics

Constant-Directivity System

Directivity

Suspension and Connections

Suspension Safety Warning

Provides critical safety warnings for suspending speaker enclosures.

Suspending Single Enclosures

Suspending Multiple Enclosures

Sx200 Connections

Technical Performance and Usage

Power-Handling Capacity Explained

Explains the ANSI/EIA RS-426-A test method for power handling reliability.

Amplifier Power Recommendations

Provides guidelines for matching amplifier output to speaker power capacity.

Architectural and Engineering Specifications

Loudspeaker System Requirements

Defines the required performance criteria for the loudspeaker system.

System Dimensions and Weight

Warranty Information

Uniform Limited Warranty

Details the warranty coverage, exclusions, and obtaining service for products.

Speaker System Warranty Period

Specifies the five-year warranty period for speakers and three years for active electronics.