Electroline ELNEXTSTANDMIXER390G

Other manuals for Electroline ELNEXTSTANDMIXER390G

Questions and Answers

P
phobbsAug 18, 2025
Why did my Electroline ELNEXTSTANDMIXER390G suddenly stop working?
- M
  matthew62Aug 19, 2025
  If your Electroline Kitchen Appliance suddenly stops, it might be due to overheating. This can happen if the appliance has been running for too long or the room temperature is too high, causing the motor to overheat. To resolve this, set the gear to "0", unplug the appliance, and allow it to cool down to room temperature before restarting. This usually takes 15-30 minutes, depending on the room temperature.
W
William CameronAug 21, 2025
How to reduce noise when my Electroline Kitchen Appliances is running?
- J
  James RiceAug 21, 2025
  The noise level of your Electroline Kitchen Appliance may increase when operating at higher speeds. The machine will be louder when working at a high gear than when working at a low gear. Refer to the manual's gear recommendations to select the appropriate speed for stirring your food.
C
Christopher FoxAug 23, 2025
What to do if my Electroline ELNEXTSTANDMIXER390G Kitchen Appliances shakes when working?
- S
  Stephen MeyerAug 23, 2025
  If your Electroline Kitchen Appliance shakes during operation, there are a couple of things to check: * Make sure that the foot pads on the base are still attached. * Ensure that the appliance is placed on a smooth and flat surface.
K
Kari Payne MDAug 26, 2025
Why does the speed of my Electroline Kitchen Appliances drop or become unstable?
- M
  Michaela ParsonsAug 26, 2025
  If your Electroline Kitchen Appliance's speed drops or becomes unstable, it could be due to the room temperature being too low, causing the lubricating oil inside the machine to harden. To fix this, remove the mixing bowl and let the machine run idle for 5 minutes. This will help soften the lubricating oil and restore a stable speed.
E
Eric AndersonAug 28, 2025
What to do if Electroline ELNEXTSTANDMIXER390G Kitchen Appliances does not run when I turn the gear knob?
- C
  Christopher TaylorAug 28, 2025
  If your Electroline Kitchen Appliance doesn't run when you turn the gear knob, ensure the following: * The power plug is securely plugged into the outlet. * Wait for power on before operating. * The machine head is properly in place.
K
Kristina RobersonAug 30, 2025
Why did my dough turned black after using Electroline ELNEXTSTANDMIXER390G?
- J
  Jessica AndersonAug 30, 2025
  If you notice the dough turns black after using your Electroline Kitchen Appliance, it may be due to black powder from the mixing head falling onto the dough. Before use, ensure the mixing head and dough hook are dry and free from any water or dust.
E
elliottrebeccaSep 1, 2025
Why does my Electroline Kitchen Appliance suddenly stop working?
- S
  Sydney WhiteSep 1, 2025
  The appliance may have automatically shut down due to overheating. This can happen if the appliance runs for too long or if the ambient temperature is too high, causing the motor to overheat. To resolve this, set the gear to "0", unplug the power cord, and wait 15-30 minutes for the appliance to cool down to room temperature before restarting.
C
Courtney TerrySep 4, 2025
What to do if my Electroline Kitchen Appliance is making excessive noise?
- S
  Steven AtkinsonSep 4, 2025
  Excessive noise can occur for several reasons: * The appliance may naturally be louder in high gear than in low gear. Choose the right gear to stir food according to the recommendations in the manual. * The amount of food being stirred might be too large, overloading the machine. Reduce the amount of stirring. * Unstable voltage can cause noise. Wait for the voltage to stabilize before using. * If the working time is too long, stop and cool down for a while before using.
B
Brian BraunSep 6, 2025
What to do if my Electroline Kitchen Appliance speed drops or is unstable?
- E
  Eduardo JacksonSep 6, 2025
  The machine speed may drop or become unstable due to: * Low room temperature causing the lubricant in the machine to harden. Remove the mixing bowl and let the machine idle for 5 minutes to soften the lubricant. * Ingredients that are too hard or too much in volume, resulting in too much load on the machine. Reduce the mixing volume. * A sudden drop in voltage. Wait until the voltage is stable before using the machine again.
J
Jonathan RobinsonSep 8, 2025
Why is my Electroline Kitchen Appliance swaying and shaking when working?
- L
  Lauren BowmanSep 8, 2025
  The appliance might sway or shake if: the foot pad on the base is off, check if the foot pad on the base is off. Or the machine is not placed on a smooth, flat countertop. Place the appliance on a smooth and flat countertop for use.

Electroline ELNEXTSTANDMIXER390G Specifications

General

Brand	Electroline
Model	ELNEXTSTANDMIXER390G
Category	Kitchen Appliances
Language	English

Electroline ELNEXTSTANDMIXER390G - User Manual

Other manuals for Electroline ELNEXTSTANDMIXER390G

Questions and Answers

Electroline ELNEXTSTANDMIXER390G Specifications