EasyManua.ls Logo

Electrolux Professional SORBY DREAM 1 - User Manual

Default Icon
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Data di emissione: Agosto, 2019 Revisione: 0 Pag. : 1/24
SLUSH MACHINE
OPERATOR’S MANUAL
ENGLISH PAGE 2
SORBY DREAM 1
SORBY DREAM 2
SORBY DREAM 3
& RESTYLING VERSIONS

Table of Contents

Questions and Answers

  • A
    andrea27Aug 14, 2025
    What to do if my Electrolux Professional SORBY DREAM 1 does not cool, or cools only partially and the compressor is running?
    • P
      Patty LongAug 14, 2025
      If your Electrolux Professional Beverage Dispenser isn't cooling properly while the compressor runs, ensure there's at least 20cm of space around the machine and it's away from heat sources. Return the device to FREEZE mode and clean the filter. Check the fan motor's electrical connections, reconnecting if necessary, or replace the motor if it's still not working. Finally, locate and fix any leaks, then recharge the system.
  • M
    Melissa EverettAug 17, 2025
    What to do if my Electrolux Professional SORBY DREAM 1 is over-freezing, making the auger movement slow or stopped?
    • R
      Robin HoldenAug 18, 2025
      If your Electrolux Professional Beverage Dispenser is over-freezing, causing the auger to slow down or stop, check and correct the product brix. Adjust the screw toward the “-“ position for a thinner consistency. Straighten the limit switch arm using pliers. Alternatively, add more product or turn the refrigeration “Off”.
  • L
    Lori GilbertAug 21, 2025
    What to do if my Electrolux Professional SORBY DREAM 1 Beverage Dispenser's dispensing valve is leaking?
    • N
      Nicholas MorenoAug 21, 2025
      If the dispensing valve on your Electrolux Professional Beverage Dispenser is leaking, try reassembling and replacing it. You can also clean and lubricate the valve and cylinder using the provided lubricant, or replace the o-rings.
  • M
    Mitchell WatsonAug 25, 2025
    Why is my Electrolux Professional Beverage Dispenser not running even when the main power switch is “ON”?
    • T
      Timothy MorrisonAug 25, 2025
      If your Electrolux Professional Beverage Dispenser isn't running with the power switch on, replace the fuses. Also, check and correct any incomplete contacts. If the issue persists, replace the gear motor.
  • S
    Sean ObrienAug 27, 2025
    What to do if my Electrolux Professional SORBY DREAM 1 does not cool, or cools only partially and the compressor is not running?
    • B
      beverly90Aug 28, 2025
      If your Electrolux Professional Beverage Dispenser isn't cooling properly and the compressor isn't running, replace the malfunctioning components. Also, check the contacts and correct those incomplete. If the issue persists, replace the compressor.
  • M
    Matthew MorrisAug 31, 2025
    Why is product flowing into the drip tray through the drainage pipe of my Electrolux Professional SORBY DREAM 1 Beverage Dispenser?
    • J
      Justin CarterAug 31, 2025
      If product is flowing into the drip tray through the drainage pipe of your Electrolux Professional Beverage Dispenser, find the seal and put it back in place. If the seal is damaged or worn, replace it and check the condition of the drive shaft.
  • R
    richard19Sep 3, 2025
    How to fix the auger if it is not turning in my Electrolux Professional SORBY DREAM 1 Beverage Dispenser?
    • M
      Mrs. Ellen KellerSep 3, 2025
      If the auger in your Electrolux Professional Beverage Dispenser isn't turning, check the contacts and correct those incomplete. If that doesn't resolve the issue, try replacing the control board or the gear motor.
  • S
    Shannon StricklandSep 6, 2025
    Why is the bowl leaking in my Electrolux Professional SORBY DREAM 1?
    • G
      Gary LeeSep 6, 2025
      If the bowl is leaking in your Electrolux Professional Beverage Dispenser, replace or reposition the seal.
  • J
    Jacqueline PerezSep 10, 2025
    How to fix noisy auger rotation in my Electrolux Professional SORBY DREAM 1 Beverage Dispenser?
    • G
      Gregory WilliamsSep 10, 2025
      To address a noisy auger rotation in your Electrolux Professional Beverage Dispenser, replace or clean and lubricate the auger with the lubricant provided with the machine. Also, check and correct.

Electrolux Professional SORBY DREAM 1 Specifications

General IconGeneral
CategoryBeverage Dispenser
ModelSORBY DREAM 1
BrandElectrolux Professional
TypeJuice Dispenser
MaterialStainless Steel
Power Supply220-240V/50-60Hz
CertificationCE