• Keep the transit bolts in a safe place. If the appliance is
to be moved in the future they must be reattached to
lock the drum to prevent an internal damage.
• Always take care when moving the appliance as it is
heavy. Always use safety gloves and enclosed footwear.
• Do not install or use a damaged appliance.
• Make sure that the appliance is stable during
transportation.
• Make sure that the appliance is disconnected from the
electricity supply during installation, maintenance and
repairs and cannot be reconnected until all work has
been carried out.
• Do not install or use the appliance where the
temperature can be less than 0°C or where it is
exposed to the weather.
• Make sure that all health and safety regulations are
obeyed when the appliance is installed in a commercial/
public environment.
• Do not install the appliance in a moving platform (e.g. on
a ship).
• The oor area on which the appliance is to be installed
must be at, stable, heat resistant and clean.
• Make sure that there is air circulation between the
appliance and the oor.
• The ventilation openings in the base (if applicable) must
not be obstructed by a carpet.
• Adjust the feet to have the necessary space between
the appliance and the carpet.
• Do not install the appliance where the appliance door
can not be fully opened.
• Do not put a container to collect possible water leakage
under the appliance. Contact the Authorised Service
Centre to ensure which accessories can be used.
38
To Next Page