11Full Service Restaurant
Electric Hot Plates
• 1-piece pressed work top in stainless steel
(2mm for 900XP - 1,5mm for 700XP) with
smooth rounded corners
• Exterior panels in stainless steel with
Scotch-Brite finishing
• Right-angled, laser cut side edges for flush
fitting of units
• Cast iron hot plates with safety thermostat,
hermetically sealed to work top
• Individually controlled hot plates, (4kW each
for 900XP - 2,6kW each for 700XP), with
step regulation
Oven features
• Recessed, double-skinned, insulated door
with pressed internal panel for air-tight
closure and better hygiene
• Oven cavity in stainless steel with ribbed
base plate (5mm cast iron for 900XP and
2mm black enamelled steel for 700XP)
• Oven chamber with 3 levels to accomodate
GN 2/1 trays
• Electric oven with separate thermostats for
top and bottom heating elements.
Adjustable thermostat:
- 900 XP from 110°C to 285°C
- 700 XP from 140°C to 300°C
900 line versions
• 2 or 4 square plates
• top models, 400, 800mm widths
• on electric static oven
700 line versions
• 2, 4, or 6 round plates
• 4 square plates
• top models, 400, 800, 1200mm widths
• on electric static oven
Electric Hob Cooking Tops
• 1-piece pressed work top in stainless steel
(2mm for 900XP - 1,5mm for 700XP) with
smooth rounded corners
• Exterior panels in stainless steel with
Scotch-Brite finishing
• 1-piece side and rear panels for durability
and maximum stability
• Right-angled, laser cut side edges for flush
fitting of units
• Smooth mild steel plate
• Individually controlled zones with step
regulation
900 line versions
• top model, 400mm width
700 line versions
• top models, 400, 800mm widths
Induction Tops
• 1-piece pressed work top in stainless steel
(2mm for 900XP - 1,5mm for 700XP) with
smooth rounded corners
• Exterior panels in stainless steel with
Scotch-Brite finishing
• 1-piece side and rear panels for durability
and maximum stability
• Right-angled, laser cut side edges for flush
fitting of units
• High impact, heavy duty, 6mm thick Ceran
®
glass cooking surface
• Independently controlled induction zones:
- 5kW (diam. 230mm for 700XP -
280mm for 900XP)
- 3,5kW (diam. 230mm for 700XP)
with overheating safety device
• Control panel with 9 power levels and
indicator light for zone operation
700XP Induction Wok Top
• High impact, heavy duty, 6mm thick Ceran
®
glass Wok bowl
• Single induction zone with overheating
safety device
• Control panel with 9 power levels and
indicator light for zone operation
700XP “Spicy” Frontal Induction Top
• 2 independently controlled induction zones,
5kW (230mm diam.) each with overheating
safety device
• 6 x GN 1/9 condiment containers
with lids
900 line versions
• top models, 400, 800mm widths
700 line versions
• top models, 400, 800mm widths
To Next Page
