To Next PageTo Next Page
Need help?Do you have a question about the Electrolux AEG BS8304021M and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | AEG BS8304021M |
| Category | Oven |
| Language | English |
Provides information on the new User Interface board OMEGA for cooking appliances.
Lists essential safety precautions for working with appliances and handling electronic components.
Glossary of technical terms, acronyms, and definitions used throughout the manual.
Details the applications and features of the Vision VCU interface across various oven and cooker variants.
Compares the RED (AEG) and White (ELECTROLUX) versions of the Vision VCU interface.
Explains the procedure for fixing the 7-zone Vision VCU touch board assembly.
Explains the procedure for fixing the 10-zone Vision VCU touch board assembly.
Details the connectors found on the Basis PCB for interface functionality.
Specifies the necessary connectors for the Vision VCU interface configuration.
Identifies and describes the various electrical connection ports and bus systems for the interface.
Presents an example of a control panel featuring the Vision VCU user interface.
Illustrates and explains the functions of various keys on the control panel.
Details key layouts for 7-zone and 10-zone configurations on different oven models.
Explains the specific function and usage of each key symbol on the interface.
Lists key combinations for performing various functions like child safety and timer settings.
Describes the three different main views presented on the display interface.
Details the appliance start-up procedure, including first connection with mains and initial settings.
Describes OFF_STATE, DAY/NIGHT BRIGHTNESS, RESIDUAL HEAT DISPLAY, and STANDBY states.
Step-by-step guide to activate and deactivate demo mode for showroom demonstrations.
Procedure for activating service mode for appliance testing and troubleshooting.
Procedure for deactivating service mode after tests are completed.
Step-by-step workflow for performing various tests within service mode.
Test procedure for verifying the functionality of the appliance's heating elements.
Test procedure to check the accuracy and operation of the temperature sensor.
Test procedure for the food probe sensor, simulating different temperatures.
Instructions on how to display software and firmware versions of the interface and power board.
Steps to test the display functionality, including pixels, backlight, and brightness.
Test procedure for the door lock mechanism, specifically for pyro models.
Explains the format and meaning of alarm codes (FXXX) indicating failure locations.
Lists common error codes, possible failures, and recommended troubleshooting actions.
