Need help?Do you have a question about the Electrolux Beam and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | Beam |
| Category | Vacuum Cleaner |
| Language | English |
Guides on selecting the most suitable location for the central vacuum appliance within the home.
Advises on strategically positioning wall inlets for optimal hose reach and room coverage.
Explains methods for concealing 52mm pipework in existing structures and new builds.
Covers pipe installation through solid walls, including dropping from the other side or chasing.
Details installing floor-mounted inlets with pipework in timber joist and solid floors.
Describes side-on and face-on inlet installations through timber partition/stud walls.
Provides instructions for installing the VacPan automatic dustpan.
Guides on installing the personal clothes brush accessory.
Step-by-step guide for connecting the low voltage wire to a standard wall inlet.
Instructions for wiring VacPan and Personal Clothes Brush accessories.
How to connect low voltage wires to Platinum and Specifier appliances.
Emphasizes clean-cut pipe edges for smooth airflow and preventing blockages.
Highlights the critical direction of sweep T-pieces to avoid sharp edges causing blockages.
Specifies applying glue to the pipe, not the fitting, to prevent internal obstructions.
Explains the looping method for low voltage wiring to ensure continuity and accessibility.
Mandates the placement of sharp 90° bends directly behind inlets as anti-blocking devices.
Lists the main fittings, ductwork, wall inlets, and appliance for installation.
Lists essential tools needed for the installation process.
To Next Page