5 RULES
OF BEAM CENTRAL VACUUM
INSTALLATION
Summary
1
THE PIPEWORK: CLEAN-CUT EDGES
2
SWEEP T: CORRECT DIRECTION
3
GLUE: THE PIPE, NOT THE FITTING
4
LOW VOLTAGE WIRE: LOOPED TO EACH INLET
5
SHARP 90°BEND: ONLY BEHIND EVERY INLET
If at any time you are not sure what to do - PLEASE call
our service department on
0845 260 0123
We will be happy to assist you from 8.30am-5.30pm Monday to Friday.
10
To Next Page
Loading...
