To Next PageTo Next Page
Need help?Do you have a question about the Electrolux BL14536RBH and is the answer not in the manual?
General| Model | BL14536RBH |
|---|---|
| Category | Lawn Mower |
| Cutting Height Adjustment | Central |
| Power Source | Electric |
| Power type | Electric |
Understand controls and proper use of the equipment, operator responsibilities, and safe practices.
Inspect the area, wear appropriate clothing, and handle fuel safely before operating the machine.
Guidelines for safe mowing, slope operation, traffic awareness, and emergency procedures.
Guide for mounting and securing the steering wheel onto the tractor's steering shaft.
Verify electrical connection of the safety switch under the seat for proper function.
Steps for connecting the battery, including notes on charging and safety precautions.
Critical safety advice regarding metal objects, battery contact, and handling.
How to set gauge wheels for proper deck positioning and to prevent scalping.
Procedures for adjusting the bagger assembly horizontally and vertically for optimal fit.
Steps to convert the mower to mulching mode, including part installation.
Steps to convert the mower for rear discharge, including chute installation.
Steps to convert the mower for bagging, including bagger assembly.
Identifies and describes the location and function of all operator controls on the machine.
Instructions on safely refueling the engine with unleaded petrol outdoors.
Steps for safely starting the engine, including pre-operation checks and choke usage.
Procedure for operating the tractor with a warm engine, including throttle and gear selection.
Steps to convert the mower to mulching mode, including part installation.
Steps to convert the mower for rear discharge, including chute installation.
Steps to convert the mower for bagging, including bagger assembly.
Crucial safety precaution to disconnect the spark plug wire before any service.
Daily checks including oil level, bolts, battery, air screen, and brake operation.
Procedures for cleaning the machine, avoiding high-pressure washers.
Important instructions for correct blade installation, sharpening, and balancing to prevent imbalance.
Step-by-step instructions for safely removing and installing mower blades, emphasizing proper torque.
Critical reminder to tighten the lock nut after completing brake adjustment to ensure safety.
Lateral adjustment procedure for the cutting unit to ensure proper alignment during forward movement.
Common reasons why the engine fails to start, including fuel, ignition, and electrical issues.
Diagnosis for when the starter motor does not engage or turn the engine.
Troubleshooting steps for an engine that runs rough or inconsistently.
Identifying causes for reduced engine power, such as air filter or fuel issues.
Reasons for engine overheating, including load, cooling system blockages, and oil levels.
Diagnosing issues when the battery fails to charge, possibly due to fuse or cell defects.
Troubleshooting steps for when the machine's lights are not working, checking bulbs and wiring.
Identifying causes of abnormal machine vibration, typically related to blades or engine mounting.
Diagnosing and resolving issues that lead to uneven grass cutting, such as blunt blades or improper deck leveling.
Critical safety warning against using gasoline for cleaning and recommending alternatives.
Information required for ordering spare parts and contacting dealers for warranty service and repairs.
