To Next PageTo Next Page
Need help?Do you have a question about the Electrolux Bestgreen BM135H107 and is the answer not in the manual?
Covers operator responsibilities, instruction importance, and accident prevention.
Covers pre-operation checks, safety during fueling, and equipment inspection.
Covers safe operating practices, slope limits, and shutdown procedures.
Covers routine maintenance and safe storage practices for the machine.
Instructions for assembling the steering wheel and related components.
Steps for mounting and adjusting the operator's seat.
Procedure for installing the battery, including charging notes and safety warnings.
Critical safety steps for connecting battery terminals to prevent sparks.
How to adjust gauge wheels for optimal cutting height.
Instructions for installing the mulcher plate and switching modes.
Overview and identification of all machine controls and their locations.
Explanation of the light switch function.
How to use the throttle to regulate engine speed.
Description of the combined brake and clutch pedal.
Explanation of the lever's positions for driving.
How to connect and disconnect the cutting unit.
Procedure for quickly raising or lowering the cutting unit.
How to use the ignition switch for starting and stopping.
How to engage and disengage the parking brake.
Operation of the free-wheel lever for towing.
How to use the choke for cold engine starts.
Proper procedures and safety warnings for filling the fuel tank.
How to check and maintain the engine oil level.
Instructions for checking and maintaining correct tire pressure.
Essential checks and procedures before starting the engine.
Correct positioning of controls before starting the engine.
How to use the gas control for a warm engine.
Steps for starting the engine and immediate post-start actions.
Procedures for cold starting and purging the hydrostatic transmission.
General driving advice, safety switch, and operational tips.
Advice and tips for achieving optimal cutting results.
Critical safety information regarding operation on slopes.
Procedure for safely stopping the engine.
A log for recording scheduled maintenance.
Information on sharpening, replacing, and balancing mower blades.
How to adjust the brake system for proper function.
Step-by-step guide to removing the cutting unit.
Instructions for replacing the drive belt for the cutting unit.
Steps for reassembling the cutting unit after maintenance.
How to adjust the overall cutting unit height.
Procedure for leveling the cutting unit side-to-side.
Adjusting the cutting unit's front-to-back height difference.
How to adjust the neutral position of the motion control lever.
Importance of keeping the transaxle cooling fins clean.
Notes regarding transaxle fluid and sealed systems.
Diagnosing issues when the engine fails to start.
Identifying causes for uneven or weak engine performance.
Troubleshooting battery charging and lighting problems.
Identifying causes of excessive machine vibration.
Diagnosing issues leading to uneven cutting results.
Steps for preparing the machine for long-term storage.
Details needed when ordering replacement parts.
Official statement of compliance with European directives.
General| Model | BM135H107 |
|---|---|
| Category | Lawn Mower |
| Engine Power | 1.9 kW |
| Cutting Width | 42 cm |
| Cutting Height Range | 25-75 mm |
| Cutting Height Adjustment | Centralized |
