Need help?Do you have a question about the Electrolux CK 460 and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | CK 460 |
| Category | Ventilation Hood |
| Language | English |
Electrical installation and hood mounting by qualified personnel. Ensure safety clearances.
Safe operation, fire prevention, and importance of cleaning grease filters to avoid ignition.
Safe disposal of the cooker hood. Contact local authorities for proper methods.
List of items included with the cooker hood and those available as optional extras.
Explains the two operating systems: extraction to outside and recirculation.
Details the cooker hood's control panel buttons for speed and lighting.
Ensuring proper airflow by keeping windows closed and having an adjacent room window open.
Caution when using hood with other combustion appliances; open window for recirculation mode.
Instructions for cleaning the exterior of the cooker hood with mild detergent.
Monthly cleaning of grease filters. Removal and cleaning method described.
Steps to remove and clean the motor cover, inlet ring, and fan wheel.
Procedure for replacing the cooker hood light bulb safely.
How to clean and reactivate the LONG LIFE carbon filter, and when to replace it.
Basic checks before contacting support: plug, fuse, and avoiding self-repair.
Information on obtaining service and spare parts from dealer or service company.
Check for damage and report any faults or missing parts to the retailer immediately.
Mounting the hood at least 40 cm above electric burners; not approved for gas burners.
Placement of the electric outlet and connection details for the hood's power cord.
Steps to mount the hood in a cupboard using template, locknuts, screws, and washers.
Alternative method for cupboard mounting using screws, spacers, and plastic covers.
Procedure for fitting the hood between cupboards using brackets, screws, washers, and nuts.
Instructions for wall mounting, drilling, fitting screws, and securing the hood.
Fitting the cold air valve into the hood outlet for specific ventilation setups.
Connecting the ventilation pipe and metal flange for external ducting.
Installing the LONG LIFE carbon filter for recirculation mode and ensuring airflow.
To Next Page