Electrolux EBR3216 User Manual (English)

Questions and Answers:

K
Kathryn FloresAug 3, 2025
What to do if my Electrolux EBR3216 Blender does not start?
- J
  juliehawkinsAug 3, 2025
  If your Electrolux Blender isn't starting, there are several potential causes: * Ensure all components are properly locked into position. * Select the appropriate speed setting; for PULSE, ensure the speed selector is on the PULSE position. * Reduce the jug's contents if it's overfilled, ensuring you do not exceed the maximum level. * Check the plug connection to the outlet, or try a different outlet. * In case of a power outage, wait for the power to be restored. * If the electric current is over the setting value, switch off the blender and unplug the power cord, allow the appliance to cool down, and then press the red salient point. Then put the plug back into the wall socket and switch the appliance on again.
S
Shane LopezAug 10, 2025
Why is my Electrolux Blender leaking from the lid?
- T
  Tiffany GreerAug 10, 2025
  If your Electrolux Blender is leaking from the lid, it's likely due to one of two reasons: * The jug is overfilled. Reduce the contents to below the maximum level. * The lid isn't correctly positioned. Ensure the lid is properly locked onto the blender jug.
T
timothy80Aug 18, 2025
What to do if my Electrolux Blender is leaking from the base?
- J
  Jason SanchezAug 18, 2025
  If your Electrolux Blender is leaking from the base of the jug, it's probably because the rubber seal isn't positioned correctly or is missing. Reposition the rubber seal on the blade assembly and lock it correctly onto the jug.
T
Todd WilsonAug 26, 2025
How to fix an Electrolux EBR3216 Blender when the blade does not turn easily?
- F
  fgrayAug 26, 2025
  If the blade of your Electrolux Blender isn't turning easily, it's likely because the pieces of food are too large or too hard. Reduce the size or quantity of the ingredients, and consider adding some liquid.