Electrolux EBR9804S - Getting Started: Initial Setup; First-Time Washing; Carafe and Base Assembly; Safe Handling and Resting

4
EN
Getting started
1. Before using the blender for the
rst time, washallpartsexceptfor
themotorbase(F).Thecarafe(A)can
also be washed in dishwasher.
Caution! The blades are very sharp!
Note! The blade assembly (E) is not
removable.
3. Close the lid (C) and insert the
measuringcup(D)inthellerhole
andlockintoposition.( Youcanuse
the measuring cup to add ingredients
while the blender is running. Close
thellerholeimmediatelyafter,to
avoidsplashing.)
Caution! Never run the blender
empty.
2. Place the blender carafe (A) with
the handle towards the front, onto
themotorbase(F)(Thecarafecan
onlybeplacedinoneposition).
Put the ingredients in the carafe.
(Do not exceed the maximum
level as indicated on the carafe.)
5. Processing hot liquids: We
recommendtoallowhotliquidstocool
down(max90°C)beforellingthe
carafe(A).Fillthecarafeonlyhalffull
and start processing on low speed.
The blender carafe can become very
warm – take care to protect your hands
andtoventilatesteamoutthroughthe
llerhole.
Always replace the lid (C) before use.
6. Start the blender: Plug the power
cord into mains socket. Press the
button,theLEDlightilluminate
andthedisplay(L)becomesvisible.
Pressthe1(Low),2(Medium)or3
(High)button,toselectthedesired
processing speed.
4. Keep hands and utensils out of the
blending carafe (A) while blending.
Afterprocessingheavyloads,letthe
appliancerestfor5minutesbefore
nextuse.
Energy saving mode: If the
appliance is left inactive or is not
operating for 3 minutes, it will
automatically switch o.
(F)
(C)
(D)
(E)
(A)
(A)
(A)
(C)
(D)
(A)
(C)
(C)
(A)
(F)
(D)
(L)