Electrolux EBR9804S - Troubleshooting; Troubleshooting Guide

7
EN
Troubleshooting
Symptoms Possible causes Solution
Theblenderdoesnot
switch on.
Thecarafe(A)/base(F)arenotxedproperly. Check if all the components are in correct
position. Note! the carafe (A) can only be placed
on the base (F) with handle towards the user
interface.
The
button is not pressed. Make sure the buttonisilluminated.Ifnot,
press the
button to switch the blender on.
Themotorhasoverheated.Thedisplay(L)is
blinking.
Allowtheappliancetocooldownforatleast5
minutes and all the buttons will lit up again.
Theplugisnotproperlyconnectedtothemains
socket.
Check the connection of the plug to the outlet or
try another outlet.
Power outage. Waituntilpoweroutageisover.
Functional problem. Contactauthorizedservice.
Troubleshooting
Disposal
Packaging materials
Thepackagingmaterialsareenvironmentallyfriendlyandcanberecycled.Theplasticcomponentsareidentiedbymarkings,e.g.
>PE<,>PS<,etc.Pleasedisposethepackagingmaterialsintheappropriatecontaineratthecommunitywastedisposalfacilities.
Old appliance
Thesymbol
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall
behandedovertotheapplicablecollectionpointfortherecyclingofelectricalandelectronicequipment.Byensuringthisproduct
isdisposedofcorrectly,youwillhelppreventpotentialnegativeconsequencesfortheenvironmentandhumanhealth,whichcould
otherwisebecausedbyinappropriatewastehandlingofthisproduct.Formoredetailedinformationaboutrecyclingofthisproduct,
pleasecontactyourlocalcityoce,yourhouseholdwastedisposalserviceortheshopwhereyoupurchasedtheproduct.